Siemens Answers with SIMOTICS S Synchronous Servomotor Solutions with the Highest Standards for Maximum Efficiency

Protect your investment by choosing Siemens synchronous servo motor (or servomotor) technology for your motion control applications. Recognized the world over for precision, robustness, and wide range of designs, you can depend on Siemens to help you exceed your short and long-term goals.

Whether your application is positioning, angular synchronism, cyclic drives or path control in machine tools — a SIMOTICS servomotor from Siemens is your first choice whenever high-speed and precise motion sequences are demanded. Users profit from a high dynamic performance, precision, compactness, efficiency and ruggedness.

Fitted with a built-in type plate and DRIVE-CLiQ system interface, you will benefit from optimum interaction with Siemens SINAMICS S110 and SINAMICS S120 drive systems.

Choose the Perfect Synchronous Servo Motor with Features to Improve Any Application

Wide torque range

Industry-leading efficiency ratings

Range of cooling types and protection classes

Various built-in transmitters

Integrated parking brake

SIMOTICS S News

Out with the Old

In with the New

SIMOTICS S 1FK7 Generation 1 Discontinuation

The SIMOTICS S-1FK7 Generation 1 range of servomotors (SH36–100, without direct mounting on the gear unit) was announced for phase out on October 1, 2014.  Product discontinuation will be effective October 1, 2016.

> Read the announcement

SIMOTICS S-1FG1 Servo Geared Motors

With up to 25 transmission ratios to support applications with a wide range of torque and speed requirements, SIMOTICS S 1FG1 motors feature extremely precise motion with high dynamic performance.

Find more on the tab below.

> Read the announcement


 

1FK7 – The Most Compact, Cost-Effective, Synchronous Servomotor

Featuring natural cooling and a rugged, maintenance-free design, the 1FK7 synchronous servo motor is ideal for motion control applications where a final position must be reached very quickly with ultimate precision. High Dynamic models have the ability to speed up and slow down very quickly. With high torques of up to 108 Newton meters and a particularly favorable torque-inertia ratio, the 1FK7 motor achieves a very high dynamic response, which means shortened cycles and less wear on the motor, resulting in decreased machine downtime. Servo motors 1FK7 are available in IP ratings 64 to 67 with a high overload capability (up to 3 times rated torque) and rotatable connectors.

A Motor in a Month

There are now two programs for getting you a new or replacement SIMOTICS S-1FK7 servomotor in 4 weeks.

Siemens still offers over 100,000 1FK7 Generation 2 servomotor configurations in 4 weeks or less via drop ship to addresses in the USA.
> Learn more here

There's now a new program, SIMOTICS S-1FK7 preferred servomotors, featuring a more focused selection available for all countries with delivery in less than four weeks.

> This flyer tells you about this and other benefits of the 1FK7 Preferred program

Special Features and Options

Key Attributes

 

 

Absolute or incremental encoders

All the advantages of Siemens electronic

nameplate DRIVE-CLiQ

Available with or without holding brake

400 / 480V or 230V ratings

Keyed or plain shaft

Geared with planetary, bevel, offset-shaft,

worm, or helical gears

Available in Compact, High Dynamic or High Inertia design models

1FK7 Compact (CT) servomotors

Space-saving installation through very high-power density

Exceptional short design

Wide range of motors in shaft heights 20 to 100 mm

1FK7 High Dynamic (HD) servomotors

 

Intended for highly-dynamic applications with

low-load inertia

Most rapid acceleration due to low rotor inertia

Higher productivity du to shortened cycle times

1FK7 High-Inertia (HI) servomotors

 

 

Very good production quality in applications with

high-load inertia

Very good control capability of high-load inertias

or widely varying load inertias

For constant speed or interpolating applications with high-load inertia


Technical Data

Compact (CT)

High Dynamic (HD)

High Inertia (HI)

Shaft Heights

20 – 100 mm

36 – 80 mm

48 – 80 mm

Rated speed *

2,000 – 6,000 rpm

2,000 – 6,000 rpm

2,000 – 6,000 rpm

Rated power *

0.07 – 11 HP / 0.05 – 8.2 KW

0.8 - 5.1 HP / 0.6 - 3.8 kW

0.5 - 4.2 HP / 0.4 - 3.1 kW

Rated torque *

0.06 - 27 lb-ft / 0.08 - 37 Nm

0.7 - 13 lb-ft / 0.9 - 18 Nm

0.9 - 11 lb-ft / 1.2 - 15 Nm

* Depending on specific motor version and type

Need more Technical?