The SITRANS LH100 series pressure transmitter converts level-proportional hydrostatic pressure into a standardized 4 to 20 mA signal. Measuring just 23.4 millimeters in diameter, the sensor can be mounted in pipes with a 1 inch diameter, making it flexible for use in a wide range of applications. With mechanical protection IP 68, a submersible piezo-resistive sensor with ceramic diaphragm is designed for harsh environments.  The sensor is available with cable lengths ranging from three to a maximum of fifty meters in length. The Sitrans LH100 is also fitted with an integrated humidity filter, permitting simple installation without the need for a junction box.




Long-Term stability

0.25%/12 months

Measuring range

0 – 4 mH2O (0 – 13.2 ftH2O) to 0 - 20m H2O (0 – 66 ftH2O)


  • Compact design

  • Corrosion resistant material

  • Housing: stainless steel 316L

  • Cable: sheath made of PE

  • Cable length: standard 10, 20, or 30 m, special length up to 50 m possible

  • Explosion protected version acc. ATEX II 1 G Ex ia IIC T4 Ga and IEC Ex Ex ia IIC T4 Ga available

Standard measuring set:

  • Transmitter

  • Cable hanger

  • Junction box

Did this information help you?