The SITRANS F C MASS 2100 DI 1.5 has demonstrated superior performance in numerous applications and field trials relating to mass flow- and density accuracy and turn down ratio.
The single continuous tube design without internal welds, reductions or flow splitters, offers optimal hygiene, safety and CIP cleanability for food & beverage and pharmaceutical applications.
The SITRANS F C MASS 2100 DI 1.5 is today the preferred meter for research and development and mini-plant applications for liquid or gas measurement, where measuring very small quantities (e.g. drops per hour) is important.
In order to make a complete flow meter, the SITRANS F C MASS 2100 flow sensor must be combined with one of the following MASS transmitters:
Typical applications: Dosing within chemical industry (dosing of chemicals), Food & beverage industry (beer, juices, liquid such as chocolate, dressings) and Automotive industry (Engine test rigs)
From 0 to 65 kg/h (0 to 143 lb/h)
DI 1.5 (1/16")
≤ 0.1 % of rate
Liquid pressure max 365 bar / max 5294 psi (Hastelloy)
Liquid pressure max 230 bar / max 3330 psi (Stainless steel)
From -50 to 180 °C (-58 to 356 °F )
One tube bended
IP65 (NEMA 4)
EEx (ia) IIC T3-T6
Dual-drive pick-up and driver construction facilitate ultra low-weight pipe construction giving the markets smallest and most stable zero point
Markets biggest wall thickness, ensure optimal lifetime, corrosion resistent and high pressure durability
Multiplug electrical connector and SENSORPROM enables true Plug & Play facilitating cost efficient installation and commisioning
Enhanced safety due to standard intrinsically safe EEx ia design
4-wire Pt1000 temperature measurement ensures optimum accuracy on mass flow, density and % fraction